The Nebula X1 projector, paired with its official wirelesssatellite speakers and wireless microphone, delivers an immersive audio-visual experience. Below is a detailed guide to ensure seamless setup and optimal performance of these accessories.

Before You Begin

1. Compatibility Check:

• The left (L) and right (R) wireless satellite speakers are exclusive to the Nebula X1 projector and cannot be paired with other devices.

• The wireless microphone must be used with the satellite speakers and cannot function independently.

2. Placement Tips:

• For the best 4.1.2 surround sound experience, position the left and right speakers symmetrically on either side of the projection screen.

3. Power Requirements:

• Turn on the projector before initiating any pairing process.

• The speakers and microphone require sufficient battery life or a power source for stable operation.

Pairing the Satellite Speakers

Follow these steps to connect the speakers to your Nebula X1 projector:

1. Activate Pairing Mode:

• Press the power button on each satellite speaker until their LED light bars begin to flash rapidly.

• If the speakers do not enter pairing mode automatically, double-press the power button to manually enable it.

2. Pair via Projector Settings:

• Navigate to the projector’s menu:Settings > Remotes & Accessories > Pair More Official Accessories.

• Follow the on-screen instructions to complete the pairing.

3. Confirmation of Connection:

• Once paired, the LED light bars on both speakers will stay lit steadily, indicating a successful connection.

• The speakers will automatically reconnect to the projector each time they are powered on.

Technical Specifications of Satellite Speakers:

• Audio Output Power: 2 x 80W

• Audio Channel: 4.1.2 Surround Sound (when used with the projector)

• Input Delay: ≤25ms

• Play Time:

• 8 hours at 45% volume

• 3.5 hours at 100% volume

• Charging Port: Type-C (use the included USB-C to C cable).

Pairing the Wireless Microphone

The microphone must be paired with the speakers first. Follow these steps:

1. Ensure Speakers Are Ready:

• Turn on the satellite speakers and confirm they are already paired with the projector.

2. Power On the Microphone:

• Press the power button on the microphone. It will automatically connect to the speakers.

If the microphone does not automatically connect to the speakers, follow the steps below to pair.

• On the projector, go to: Settings > Remotes & Accessories > Pair More Official Accessories > "soundcore Wireless Microphone".

• Follow the on-screen instructions to pair the microphone manually.

Key Features of the Wireless Microphone:

• Reverb Control: Press the button to cycle through three reverb modes: Off > Low > High.

• Volume control: from 0-7(0 equals to silence)

• Battery Life: Up to 40 hours.

• Charging Time: Approximately 3 hours.

• Working Range:

• Indoors: Up to 10 meters

• Outdoors: Up to 50 meters

• Latency: ≤15ms.

—————————————————————————————————————

Usage Tips

1. Volume Adjustment:

• Start with a moderate volume (e.g., 45%) to maximize battery life and avoid distortion.

2. Reverb Optimization:

• Use the Reverb Control feature to adjust vocal clarity.

• Off: Ideal for clear, direct audio.

• Low: Adds subtle depth for presentations or speeches.

• High: Enhances dramatic or musical performances.

3. Positioning:

• Keep the microphone within the recommended range to ensure stable connectivity.

• Avoid obstacles between the microphone and speakers for minimal latency.

4. Automatic Reconnection:

• After the initial pairing, the speakers and microphone will reconnect automatically upon power-on.

By following this guide, you can fully leverage the 2 x 80W audio output and 4.1.2 surround sound of the Nebula X1 satellite speakers, combined with the low-latency (≤15ms) wireless microphone. Whether for home theaters, presentations, or live events, this setup ensures crisp audio and seamless integration. For visual guidance, refer to the official Quick Start Guide (QSG) and setup videos provided with your accessories.

https://support.seenebula.com/s/product/a08J1000000YpMnIAK/nebula-x1

If you still have any questions, please contact Nebula customer support at Support@seenebula.com for further assistance.