To avoid damaging your walls, please use the provided adhesive to affix the bracket to a wall with a smooth surface, like tiles or glass. Furthermore, kindly pay attention to the following key points before mounting the bracket:
-
Install the bracket at the suggested height. Exceeding the suggested height may result in the vacuum cleaner attachments falling off the bracket.
-
The installation area must be a firm and even surface, like polished glass or tile surfaces.
-
Before installation, use a solution with 50% alcohol to thoroughly clean the surface.
After the wall mount bracket is securely installed, please pay attention to the following reminders:
-
After the bracket is attached to the wall, apply firm pressure for 30 seconds to ensure it is even and securely affixed. It must stay undisturbed for at least 24 hours and is most effective after 72 hours.
-
When attaching handheld vacuum cleaner accessories to the bracket, ensure the vacuum cleaner is not hanging in the air. It should be placed back into the robot, and no additional heavy components should be attached to prevent them from falling off the bracket.
Kindly refer to the image below to help you install the wall mount bracket:
If you have any other questions regarding the E20 robot vacuum, please don't hesitate to contact us for further assistance.
