This article is designed to provide detailed information regarding the dimensions of the X10 Pro Omni and the all-in-one Omni Station.
This information will be helpful for you to find a proper location in your home to set up the X10 Pro Omni and its Omni Station. Please be aware of the height of your furniture to ensure that the robotic vacuum cleaner will be able to clean underneath your furniture.
Note: The Omni Station's height when the lid is open (from the bottom of the station to the top of the open lid) is about 662mm, of which the height of the Omni Station is 460mm and the height of the open lid is 202mm. However, it is essential to consider additional spacing for the proper operation and maintenance of the Omni Station. Specifically, the clearance needed to remove the clean water tank and dirty water tank is an additional 270mm in height. Therefore, to ensure that there is sufficient spacing for you to comfortably reach and remove the water tanks, it is highly recommended to place your Omni Station at a location that has at least a total height clearance of 850mm.
Note: Please do not place the Omni Station inside a wardrobe because the moisture in the air can easily cause the wardrobe to become damp.
Please refer to the following images and measurements of the X10 Pro Omni and the Omni Station:
- Dimensions (Length*Width*Height)
- The X10 Pro Omni Robot：327mm*353mm*113.5mm
- The Omni Station：365mm*480mm*460mm
- Weight
- The X10 Pro Omni Robot：4,560g
- The Omni Station：7,240g
- The Combined Weight (when the robotic vacuum cleaner is docked on the Omni Station): 11,800g
- Accessory Capacity
- Dustbin: 330ml
- Disposable Dust Bag: 2.5L
- Clean Water Tank: 3L (195mm*11mm*26.5mm)
- Dirty Water Tank: 2.7L (195mm*11mm*26.5mm)
If you have any further questions or concerns, please don't hesitate to contact us for assistance.
